EV Charging Cost & Time Calculator

Estimate energy, charging cost and duration at home or a public charger using explicit average-power assumptions.

All prices, performance and usage are your assumptions. Location supplies no live tariff, incentive, vehicle or product data. Currency formats values without conversion.

Use usable, not gross/nameplate capacity.
Stored battery energy / purchased charger energy. Check the billing boundary.
Use the lower applicable limit.
User estimate for this session.
Use the lower applicable limit.
Allow for taper, temperature and shared power. This is not a vehicle charging curve.
Parking, idle fees and subscriptions excluded.

About this tool

Calculate energy added between two state-of-charge levels, then estimate purchased electricity, cost and time at home and a public charger. Average-power controls make charging-speed assumptions visible rather than treating the charger label as constant delivered power.

How the calculation works

Stored energy = usable battery capacity x (target charge - starting charge). Purchased energy = stored energy / charging efficiency. Average purchased power = applicable charger or vehicle limit x entered average fraction. Duration = purchased energy / average power. Home cost = purchased energy x home rate. Public cost adds purchased energy x public rate, charging minutes x time fee and one session fee.

Worked example

For a 60 kWh usable battery charged from 20% to 80%, energy added is 36 kWh. At 90% efficiency, purchased energy is 40 kWh. A 7.2 kW home average takes 5.56 hours and costs 10 at 0.25/kWh. A 100 kW limit averaging 50% takes 0.8 hours. At 0.60/kWh plus 1 per session and 0.10/minute, public cost is 24 + 1 + 4.80 = 29.80.

Use average power, not only the charger rating

The applicable limit is the lower of the charger and vehicle limits for that connection. The average fraction describes the mean purchased power across your whole chosen charge interval. It can incorporate taper and interruptions as an explicit estimate, without claiming to simulate them.

A low average fraction increases duration and any per-minute charge but does not change the stored-energy target. This is useful for testing how time-based pricing changes the same charging session.

Check purchased versus stored energy

Battery energy added and metered charger energy are different quantities. At less than 100% efficiency, more electricity is purchased than remains stored. Do not add charging losses twice when a provider estimate already measures the same energy boundary.

Use your actual contract prices and session fees. Country and region are recorded for context; the calculator does not infer connector compatibility, local rates, taxes, charger availability or vehicle specifications.

Assumptions and limitations

Usable battery capacity and efficiency are constant over the selected session. All charging power uses the same purchased-energy boundary as the rate. Average power is supplied by you; it is not derived from a live vehicle database. Starting and target percentages refer to the same usable capacity. Zero charge added means no charging session.

Actual speed depends on the vehicle charging curve, battery temperature, state of charge, site limits and shared power. High targets can cause tapering. Confirm which energy boundary your charger bills before setting efficiency. Idle fees, parking, subscriptions, installation and standby consumption are excluded.

Sources and editorial responsibility

Maintained by Renvoro Pty Ltd. Sources inform the methods and assumptions shown here; outputs have the limitations described on this page.

Method reviewed 2026-10-21. Calculation standards · Report an issue