Home Battery Savings Calculator
Compare solar-only and battery cash flows with charging losses, export opportunity cost, degradation and maintenance.
Your result
For information only. Results are estimates based on your inputs and assumptions. This tool does not provide financial, investment, tax or legal advice or recommend any financial product. Verify important figures and seek qualified advice where appropriate. Battery performance, cycle count, prices and useful life are your assumptions. Annual energy matching does not establish feasible dispatch, warranty coverage or guaranteed savings.
About this tool
Estimate the incremental economics of adding a home battery to the same solar system, or charging it from off-peak grid energy. Account for energy lost in storage, solar exports given up, maintenance and declining usable capacity. All rates and product figures are yours.
How the calculation works
Year-y delivery limit = usable AC delivered capacity x equivalent full cycles x (1 - degradation)^(y - 1). Actual delivery is capped by household demand remaining after direct solar use, and in solar mode by surplus solar x round-trip efficiency. Charging energy = delivery / efficiency. Incremental gross benefit = avoided imports - charging energy x export credit or off-peak rate. Net cash subtracts maintenance. Simple payback divides battery capital by first-year net cash. NPV discounts each year-end net cash flow and subtracts installed battery cost at year zero. Discounted ROI = NPV / installed battery cost x 100, when installed cost is positive. It is a total over the entered projection, using the entered discount rate, rather than an annualized return.
Worked example
A 10 kWh nominal battery with 9 kWh usable AC delivery, 90% round-trip efficiency and 300 full cycles can deliver 2,700 kWh/year, requiring 3,000 kWh charging energy. With 6,000 kWh solar, 3,000 kWh direct use and 7,000 kWh household demand, those annual caps permit the full estimate. At 0.30 import, 0.05 export and 50 annual maintenance, incremental net saving is 810 - 150 - 50 = 610 currency units. An 8,000 installation has 13.11-year simple payback before degradation; that exceeds a 10-year horizon.
Compare the same solar system in both scenarios
Solar-only annual bill benefit equals direct solar self-use valued at the entered import rate plus remaining generation valued at the export credit. Battery incremental benefit subtracts the export opportunity cost of energy diverted into storage. The same solar installation is present on both sides, so its capital cost cancels in this incremental comparison.
The solar-plus-battery horizon result adds annual battery net cash to the solar-only benefit and deducts battery installation cost. It is not household income, an entire electricity bill, or a complete investment return. In grid charging mode, charging costs replace forgone exports and the solar baseline remains unchanged.
Choose a defensible cycle and lifetime assumption
Enter equivalent full cycles rather than counting every partial discharge as a full cycle. The model caps annual delivered energy by the annual generation and demand inputs, but cannot validate dispatch hour by hour. A high cycle count does not establish enough daily charging time or sufficient inverter output.
Use a conservative horizon consistent with your own product assumptions. A positive first-year saving can still give negative lifetime net benefit or NPV when installation cost and degradation are included. No replacement at the end of a warranty is silently assumed.
Calculate discounted battery ROI
This calculator defines discounted battery return on investment (ROI) as incremental battery NPV divided by installed battery cost, expressed as a percentage. NPV already subtracts that upfront cost and discounts each year-end net saving at your entered rate. The same solar system is the baseline. A zero result means the modeled discounted savings recover the battery cost; it is not a zero annual investment yield.
For a worked example, use a 5,000 installed cost, 10 years, 0% degradation and 0% discount, with the solar inputs in the example above. Net saving stays 610 each year: (610 x 10 - 5,000) / 5,000 x 100 = 22% discounted ROI. Change only the discount rate to 5%: NPV becomes -289.74 and discounted ROI becomes -5.79%. These are hypothetical entered assumptions, not a quoted battery return.
Assumptions and limitations
Usable capacity here means AC energy delivered over the usable window, not an unadjusted DC cell capacity. The round-trip ratio connects purchased or surplus AC charging energy to that delivered energy. Nominal capacity is a consistency check. Direct solar consumption and production stay constant; battery usable capacity degrades annually. All prices and annual maintenance stay constant.
An annual energy balance cannot show whether surplus and demand occur at compatible times. Power limits, seasonal variation, reserve settings, standby energy, export caps, replacement, warranty throughput and installation suitability require a more detailed assessment. This is not a recommendation or a guaranteed bill saving.
Sources and editorial responsibility
Maintained by Renvoro Pty Ltd. Sources inform the methods and assumptions shown here; outputs have the limitations described on this page.
Common questions
Why can battery ROI be negative when simple payback looks positive?
Simple payback divides installed cost by first-year net saving. Discounted ROI also uses the selected projection length, degradation, future maintenance and your discount rate. Positive first-year savings can therefore coexist with negative NPV and ROI. The ROI shown here is a projection total, not an annualized return or internal rate of return (IRR).
What happens to ROI when installed battery cost is zero?
ROI divides by installed battery cost, so it is undefined at zero cost. The calculator still shows the energy and cash-flow results. A genuine zero ROI from zero NPV and a positive cost is shown as 0.00%; negative returns are retained.
Guide updated 2026-11-09. Calculation method and source dates remain separate.
Method reviewed 2026-10-21. Calculation standards · Report an issue