Concrete Calculator
Estimate ready-mix volume and bags for slabs, footings, walls, columns and stairs.
Your result
About this tool
Calculate concrete in cubic yards, cubic metres and cubic feet, plus bags. Add slabs, footings, walls, columns or solid stairs, then set your waste allowance and optional ready-mix price.
How much concrete do I need for a slab?
- Choose your measuring unit and add a slab section. Enter length, width and thickness. With feet/inches selected, put thickness inches in the separate inches field rather than entering them as feet.
- Add other sections before calculating. Measure the actual concrete dimensions; wall thickness is width and wall height is depth.
- Choose an ordering allowance. The result separates each section’s net volume from the total order volume including waste.
- For bags, choose the bag preset and check its yield against the product label. For ready-mix, use cubic yards or cubic metres and ask your supplier about delivery increments and minimum orders.
How the calculation works
Rectangular volume = length × width × depth. Circular column volume = π × (diameter ÷ 2)² × height. Solid stairs = width × tread run × riser height × n(n + 1) ÷ 2. Order volume = net volume × (1 + waste ÷ 100). Bags = round up(order volume ÷ cured yield per bag).
Worked example
A 10 m × 10 m slab, 0.10 m thick, contains 10 m³. With 10% allowance, order volume is 11 m³, approximately 14.39 yd³. A bag yielding 0.02 m³ would require 550 bags. At 100 currency units per m³, the volume-based estimate is 1,100.
Small thickness changes can change a concrete order
| Slab thickness | Net volume m³ | Order volume m³ | Whole bags | Volume-based cost |
|---|---|---|---|---|
| 0.100 m (100 mm) | 10.00 | 11.00 | 550 | 1100.00 |
| 0.125 m (125 mm) | 12.50 | 13.75 | 688 | 1375.00 |
| 0.150 m (150 mm) | 15.00 | 16.50 | 825 | 1650.00 |
How much does a cubic yard of concrete cover?
One cubic yard covers 81 square feet at an entered thickness of 4 inches, or 54 square feet at 6 inches, before any ordering allowance. Coverage changes with thickness; these are quantity examples, not recommendations for a structurally suitable slab.
One cubic yard equals 27 cubic feet. Divide 27 by the thickness in feet, or divide 324 by the thickness in inches, to obtain square feet. For a uniform solid slab, this gives 108 ft² at 3 inches, 81 ft² at 4 inches, 54 ft² at 6 inches and 40.5 ft² at 8 inches.
An 81 ft² slab at 4 inches has a net volume of 1 yd³. With a hypothetical 10% ordering allowance, the calculator gives 1.10 yd³ to order. If only 1 yd³ is available including that allowance, the modeled area is 81 divided by 1.10, or about 73.64 ft². Enter the slab dimensions above and check the order volume with your chosen allowance. Supplier increments and minimum loads remain separate.
Separate measurement uncertainty from the ordering allowance
On a 100 m² slab, an extra 10 mm of average depth adds 1 m³ before waste. With a 10% allowance, that depth difference adds 1.10 m³ to the order. Recheck thickness at several points rather than assuming a larger allowance will correct an inaccurate measurement. This is quantity arithmetic, not guidance on a structurally suitable slab thickness.
All section dimensions use the selected measuring unit. In metre mode, 100 mm is 0.1 m. In feet/inches mode, enter a four-inch thickness as zero feet plus four inches; entering four feet estimates twelve times the intended depth.
Add sections without counting an intersection twice
A 5 m by 10 m slab at 0.10 m depth contains 5 m³. A separate 10 m by 0.30 m by 0.40 m footing contains 1.20 m³. If their measured concrete volumes do not overlap, the combined net volume is 6.20 m³; a 10% allowance gives 6.82 m³. If a footing measurement already includes part of the slab, adjust the takeoff so that shared volume is included only once.
Bag count rounds upward using cured yield, while the material cost here uses the entered ready-mix volume rate. It is not a bag-purchase cost or a delivered quote. Check the actual product yield and ask the supplier about truck minimums, order increments, access and separate delivery or pumping charges.
Reading yards, bags and ready-mix cost together
A 10 ft by 10 ft slab at an entered 4-inch thickness contains 33.3333 ft³, or about 1.2346 yd³ before allowance. With a hypothetical 10% allowance, the order is 36.6667 ft³ or about 1.3580 yd³. Using an entered cured yield of 0.60 ft³ per bag gives 61.1111 bags mathematically, so the purchase estimate rounds up to 62 whole bags. The four-inch thickness is an example input, not structural design guidance.
Those 62 bags have a nominal combined yield of 37.2 ft³, about 0.5333 ft³ above the order estimate. That rounding excess is separate from the 10% allowance. At an entered $150 per cubic yard, the ready-mix material estimate is about $203.70; this is not a price for buying the 62 bags. Supplier delivery increments, pumping and minimum loads remain separate.
Choose feet/inches for a slab measured in feet with thickness in inches: enter zero feet and four additional inches for this example. Results lead with cubic yards for imperial measurements and cubic metres for metric measurements. Bag-yield units and price units are independent of the measuring unit; use the units printed on the product and quote.
Assumptions and limitations
Dimensions must describe the concrete itself, not surrounding excavation. Enter wall thickness as width and wall height as depth. The stairs model assumes solid, uniform steps with no separate landing or base slab. Add those as separate sections. Bag presets are approximate; manufacturer cured yield is authoritative. Waste is an ordering allowance, not a structural specification.
Measure depth at several points and confirm quantities with your supplier. Reinforcement, load capacity, curing, pump charges, minimum orders and delivery fees are outside this estimate. This tool does not design foundations or structural concrete.
Sources and editorial responsibility
Maintained by Renvoro Pty Ltd. Sources inform the methods and assumptions shown here; outputs have the limitations described on this page.
Common questions
Why is bag yield editable?
Bags of equal weight can have different aggregate mixes and cured yields. Use the yield stated on your product label.
Should I round a ready-mix order?
The displayed volume is mathematical. Suppliers may have minimum orders and ordering increments; ask before purchasing.
Guide updated 2026-11-13. Calculation method and source dates remain separate.
Method reviewed 2026-10-09. Calculation standards · Report an issue