Gravel Calculator

Estimate aggregate volume, mass, bags and cost using your material density.

For coverage from gravel you already have, choose Coverage from available gravel.

Try a worked example

Loads example values in place of your current inputs. Choose one, then calculate. Examples are hypothetical; your inputs stay in this browser.

  • 100 ft² × 3 inches = 25 ft³ before allowance. With 10% allowance: 1.0185 yd³; at $50/yd³, about $50.93.
  • 40 m² × 5 cm with 10% allowance and hypothetical density 1,600 kg/m³: 3,520 kg; 141 whole 25 kg bags at $8 = $1,128.
  • 100 ft² minus a 20 ft² patch: 80 ft² covered. A 3-inch layer with 10% allowance needs 22 ft³ (0.8148 yd³).
  • At a hypothetical 1,600 kg/m³ density and 0% allowance: 1 yd³ = 0.764555 m³ = 1,223.287773 kg, about 1.348444 US short tons. Supplier density changes this conversion.
  • At a hypothetical 1,600 kg/m³ density and 0% allowance: 1 US short ton = 907.18474 kg = 0.5669904625 m³, about 0.741596 yd³. This is not a fixed gravel conversion.
  • At a hypothetical placed-layer density of 1,600 kg/m³ and 50 mm depth: 1 metric tonne covers 12.5 m². No order allowance, compaction or loss adjustment is added.
  • A usable placed volume of 2.5 m³ at 100 mm depth covers 25 m². The volume must already reflect the placed state; no shrinkage factor is inferred.
1. Measure areas and layer depth
Uses the selected length unit. For 3 inches in feet mode: enter 0 feet and 3 additional inches. For 5 cm in metre mode: enter 0 metres and 5 additional centimetres.

Enter each area once and subtract spaces you will not fill. Area dimensions and layer depth use the selected length unit.

Areas 1
Selected length unit.
Selected length unit.
2. Gravel allowance, density and cost
Added only to the order estimate. Set to 0% for a direct conversion with no extra material.
Replace with supplier density; moisture and compaction change this.

About this tool

Calculate gravel to order from area, volume or mass, or estimate the area covered by gravel already available at an entered layer depth. Compare cubic metres, cubic yards, cubic feet, metric tonnes and US short tons using your supplier’s density. Conversion results stay separate from extra ordering allowance, bags and cost. Coverage is a separate uniform-layer estimate that does not add ordering allowance.

Calculate gravel from measurements, volume or weight

  1. Choose your task. Area and layer depth, known volume and known mass estimate quantities to order. Coverage from available gravel starts with the amount you have and an explicit positive layer depth. Its mass and volume bases use separate units and assumptions.
  2. Add rectangular, triangular or circular areas. For a circle, enter its diameter in the length field. Mark areas you will leave uncovered as exclusions.
  3. Enter the layer depth in your measuring unit. For a 3-inch layer in feet mode, enter 0 feet and 3 additional inches, not 3 feet. In metre mode, 0 metres plus 5 additional centimetres means 0.05 m. Net area multiplied by depth gives volume before allowance.
  4. Replace bulk density with your supplier’s value in kg/m³. Volume × density gives kilograms; kilograms ÷ density gives cubic metres. Set allowance to 0% for a pure conversion. With an allowance, read the converted quantity before allowance separately from the larger order estimate. A cubic yard has no universal gravel weight.
  5. Choose metric tonnes or US short tons to match the quote. Enter bag weight in kilograms for bag counts. Select the matching price basis before estimating cost; delivery and compaction requirements need separate confirmation.

How the calculation works

Area mode: volume = net area × layer depth. Known volume: convert the entered volume to m³. Known mass: volume in m³ = mass in kg ÷ entered bulk density in kg/m³. Before-allowance mass = volume × density. Order volume = volume × (1 + allowance ÷ 100); order mass = order volume × density. Metric tonnes = kg ÷ 1,000; US short tons = kg ÷ 907.18474. Bags = round up(order mass ÷ bag weight). Available-quantity coverage = usable placed volume ÷ positive layer depth. For available mass, usable placed volume = mass ÷ placed-layer bulk density. Coverage does not apply order allowance, bag rounding or price.

Worked example

A 10 m × 4 m area with a 0.05 m layer contains 2 m³. With 10% allowance and density of 1,600 kg/m³, order volume is 2.2 m³ and mass is 3,520 kg: 3.52 tonnes or about 3.88 US tons. At 25 kg per bag, that is 141 bags.

Why gravel weight needs a density

Illustrative density assumptions for exactly 1 m³, with no waste. These values are scenarios, not a density table for specific gravel products. Match density to the volume state: order conversions may use supplier loose bulk density; coverage from mass requires density for the placed layer.
Entered density kg/m³Weight kgMetric tonnesUS short tons
1,4001,4001.401.54
1,6001,6001.601.76
1,8001,8001.801.98

From square feet and inches to cubic yards

For an imperial cross-check, cubic yards = square feet × depth in inches ÷ 324. A 10 ft × 10 ft area at 3 inches deep is 25 ft³, or about 0.9259 yd³ before allowance. With a hypothetical 10% allowance, the order is 27.5 ft³ or about 1.0185 yd³. At an entered $50 per cubic yard, material cost is about $50.93 before delivery, labour and tax.

In area-and-depth mode, the results follow your measuring system: feet, inches or yards give cubic yards first; metric inputs give cubic metres first. Known-volume and known-mass modes show the direct conversion before allowance in m³, yd³ and ft³, with the allowance-adjusted order separately. Equivalent order volumes remain available. The mass unit and price basis are separate choices, so changing the measurement unit does not change a quote from dollars per US ton to dollars per cubic yard.

Why full bags can contain more than the estimate

For the metric worked example, the estimate is 3,520 kg. Buying 141 whole 25 kg bags supplies 3,525 kg, leaving 5 kg from rounding. This is separate from the 10% ordering allowance already included. Bag pricing uses all 141 bags; mass or volume pricing uses the estimated order quantity.

The calculator does not round bulk deliveries to a supplier’s truck, bucket or minimum order size. Ask for that increment and any delivery charge before purchasing. Neither bag-rounding excess nor the entered waste percentage establishes a material-specific compaction factor.

Convert cubic feet or cubic yards of gravel to tons

Choose known volume and enter your cubic feet, cubic yards or cubic metres. For a direct conversion, use 0% allowance. Cubic feet × 0.028316846592 × density in kg/m³ gives kilograms; divide by 907.18474 for US short tons or 1,000 for metric tonnes.

One cubic yard is 0.764554857984 m³. At an entered density of 1,600 kg/m³, a cubic yard weighs about 1,223.29 kg, or 1.35 US short tons. Changing the aggregate or moisture can change that result; a cubic yard is a volume, not a fixed weight.

For the reverse conversion, choose known mass. One US short ton at the same hypothetical 1,600 kg/m³ density occupies 907.18474 ÷ 1,600 = 0.5669904625 m³, about 0.741596 yd³. A metric tonne at that density occupies 0.625 m³, about 0.817469 yd³. Different supplier density gives different yardage.

The tonne output uses 1,000 kg. The US ton output uses 2,000 lb, or 907.18474 kg, and is not an imperial long ton. Match the supplier’s quoted unit before comparing costs. For a compacted layer, confirm how loose delivered volume relates to the finished layer; this tool does not infer a compaction factor.

How much area can a ton of gravel cover?

There is no fixed area per ton. In coverage mode, enter available mass, its unit, a positive layer depth and supplier bulk density for the placed layer. A metric tonne is 1,000 kg; a US short ton is 907.18474 kg. The units are not interchangeable. The calculator converts mass to usable placed volume, then divides by depth.

For a hypothetical 1 metric tonne at 1,600 kg/m³ and 50 mm depth, volume is 0.625 m³ and theoretical coverage is 12.5 m², about 134.55 ft². One US short ton at those same assumptions gives 11.33980925 m², about 122.06 ft². These depths and densities are examples, not installation recommendations or product measurements.

For usable placed volume, density is not used: 2.5 m³ at 100 mm depth covers 25 m². The volume must already reflect the finished layer state. No loose-to-compacted, settlement, moisture or loss factor is inferred. Ordering allowance, whole-bag rounding and prices never increase coverage from the available amount. Confirm the material state and required design depth separately.

Assumptions and limitations

Depth is uniform. Order conversions use the supplier bulk density for the measured volume state; available-mass coverage requires density for the placed layer. Available volume must already be usable in that placed state. No compaction or loss factor is inferred. Ordering allowance, whole-bag rounding and prices apply only to order estimates, never coverage.

Ask the supplier which density and delivery increments apply. Wet aggregate can weigh more. If compacted thickness is required, obtain a material-specific compaction allowance rather than treating the default density as universal.

Sources and editorial responsibility

Maintained by Renvoro Pty Ltd. Sources inform the methods and assumptions shown here; outputs have the limitations described on this page.

Guide updated 2026-11-08. Calculation method and source dates remain separate.

Method reviewed 2026-10-12. Calculation standards · Report an issue