Square Footage Calculator

To find the square footage of a rectangular room, multiply its length in feet by its width in feet. A room measuring 12 by 10 feet covers 120 square feet.

1. Measure areas and exclusions
Areas 1
Selected length unit.
Selected length unit.
Shape, name and exclusions
Optional material price and currency

Rectangle: length (ft) × width (ft) = sq ft.

Try a worked example

Loads example values in place of your current inputs. Choose one, then calculate. Examples are hypothetical; your inputs stay in this browser.

  • 12 ft 6 in × 10 ft 3 in = 128.125 ft²
  • 120 + 12 − 6 = 126 ft²; at $2/ft² = $252
  • 20 × 10 minus an 8 × 6 corner = 152 ft²
Which dimensions should I measure?

For inches or metric measurements, choose the matching unit below. Add rooms and subtract uncovered areas before estimating material cost.

Rectangle length and width; triangle base and perpendicular height; circle diameter measured through its centre.
For flooring, measure inside the room surfaces and split the floor into non-overlapping areas. A circle needs diameter, not radius; triangle height meets its base at a right angle. Open full-size diagram
Paste dimensions for one or more rectangles

Replaces all current areas after the full batch passes validation. Your selected length unit, price and currency stay unchanged. Review imported dimensions, then calculate.

For a 12-foot by 10-foot room, enter 12 ft by 10 ft to get 120 ft².

Use length x width or length by width, with an optional Name: prefix. Bare numbers use the selected length unit. Asking for square feet does not change that input unit. For mixed units, write the unit on each dimension. Use m, cm, mm, ft, in or yd. You can also spell out feet or inches. You can also write 12'6" for feet and inches. Prefix a row with Subtract to exclude it. Rectangles only; edit triangles and circles manually after import. Maximum 100 rectangles and 12,000 characters. Names are optional and limited to 100 characters. Use ordinary decimals, not fractions or thousands separators. Measurements stay in this browser.

Measure a room on a scaled floor plan

Measure the inside length and width of a rectangular room on the drawing. At ¼ inch = 1 foot, a room measuring 3 by 2.5 inches on paper is 12 by 10 feet in the building, or 120 ft². At 1:50, 8 by 6 cm represents 4 by 3 m, or 12 m².

Check the printed scale against a labelled wall dimension first. Printing with “fit to page” or resizing a screenshot can change the scale.

Floor area, wall area and room volume

For a rectangular room, length × width gives the floor area. Multiply the room perimeter by height for the area of all four walls. Multiplying length × width × height gives volume in cubic units.

A room 12 ft long, 10 ft wide and 8 ft high has a 120 ft² floor, 352 ft² of walls before openings, and 960 ft³ of interior volume. See this room as a percentage of a home’s floor area.

For multiple rooms or floor cutouts, use the room-by-room area worksheet. To deduct doors and windows from the walls, use the Paint Calculator.

About this tool

To measure several rooms, enter feet and inches separately or paste one rectangle per line. Combine rectangles, triangles, circles, trapezoids and ovals, and subtract cutouts. Check each sketch, see totals in square feet, square metres or square yards, and enter a price per unit to estimate cost. Download the room-by-room CSV to keep your measurements.

How to calculate square footage with feet and inches

  1. Choose feet/inches when measurements include both units. Enter 12 feet 6 inches as 12 in the feet field and 6 in the inches field. It is 12.5 feet, not 12.6 feet.
  2. Add one section for each non-overlapping area. A rectangle uses length and width; a triangle uses base and perpendicular height; a circle uses diameter. A trapezoid uses two parallel sides and the perpendicular distance between them. An oval uses its full length and full width through the centre.
  3. Add uncovered spaces as separate sections and mark them excluded. Avoid subtracting an area already omitted from your measurements.
  4. Calculate the net area. For an area cost, choose the unit your price covers. If you are buying flooring, open the Flooring Calculator from your result to carry over your room measurements and cutouts. Enter the waste allowance and the coverage printed on each box there.

How the calculation works

Rectangle = length × width. Triangle = base × perpendicular height ÷ 2. Circle = π × (diameter ÷ 2)². Oval = π × full length × full width ÷ 4. Net area = included areas − excluded areas. 1 ft² = 0.09290304 m²; 1 yd² = 9 ft².

Worked example

A 10 ft × 12 ft room plus a triangle with a 4 ft base and 6 ft height gives 132 ft². Subtract a 2 ft × 3 ft exclusion to get 126 ft², or 11.71 m². At $2 per ft², estimated cost is $252.

Use room measurements for a cooling estimate

For a single room, open the BTU room-cooling calculator and enter its length, width and ceiling height in consistent units. Do not use a combined multi-room total or flooring exclusions as a cooling load. Area alone does not determine cooling demand; inspect the stated assumptions and obtain professional sizing before choosing equipment.

Square-foot calculations you can check

Geometry examples before material waste. Areas are rounded for display; calculations retain unrounded values.
Measured areaCalculation in feetSquare feetSquare metres
12 ft 6 in by 10 ft 3 in12.5 × 10.25128.1311.90
10 ft by 12 ft plus a 4 ft by 6 ft triangle, less 2 ft by 3 ft120 + 12 − 6126.0011.71
Circle with a 10 ft diameterπ × 5²78.547.30
20 ft by 10 ft with an 8 ft by 6 ft missing corner200 − 48152.0014.12

How to calculate the square footage of a rectangle

Measure the inside length and width in feet and multiply them. A 12 ft by 28 ft rectangle covers 336 square feet. A 50 ft by 60 ft rectangle covers 3,000 square feet.

If the dimensions are in inches, divide each by 12 before multiplying, or divide their product by 144. For an irregular room, measure separate areas and add them in the worksheet.

Try a 12 ft by 28 ft rectangle

Try a 50 ft by 60 ft rectangle

Calculate square footage from a floor plan room by room

At a drawing scale of ¼ inch = 1 foot, multiply each paper dimension in inches by four. A 3 × 2.5 in living room becomes 12 × 10 ft (120 ft²). A 2 × 2.5 in bedroom becomes 8 × 10 ft (80 ft²). A 1.5 × 0.75 in hallway becomes 6 × 3 ft (18 ft²). The three non-overlapping areas total 218 ft².

Check the scale against a labelled wall. Convert each rectangle in the scale tool and send the first one to the first worksheet area. For each later rectangle, choose Add as another area. Calculate the worksheet total, and count each overlap or shared space only once. This is an interior floor-area estimate from the rooms you enter.

Measure each rectangle on your scaled drawing

Open the three-room floor plan worksheet

What percentage of my home does my office occupy?

A 10 ft × 12 ft office covers 120 ft². In a 1,500 ft² home, the office occupies 120 ÷ 1,500 × 100 = 8% of the floor area. Use the same area units for both measurements and count the office only once in the home total.

To check the share in Ratio Calculator, enter the office as A and the rest of the home as B. In this example, B is 1,500 − 120 = 1,380 ft². The result labelled “A share of the whole” gives the office percentage.

Check the 120 ft² office share in Ratio Calculator

Measuring an L-shaped room

Split the L into two rectangles that meet without overlapping. Measure each rectangle independently, add both sections and keep their shared boundary out of the area total. Alternatively, measure the outer rectangle and subtract the missing corner as an excluded rectangle.

Use actual floor dimensions rather than adding wall lengths together. For sloped walls or a floor that is not level, distinguish horizontal floor area from the surface you intend to cover. This calculator does not determine legally reportable living area.

Square feet, square yards and square metres

Square feet measure area, not the length around a room. A 12 ft by 10 ft rectangle has 120 ft² of floor area and a 44 ft perimeter. Use area for flooring coverage; use perimeter for lengths such as skirting or baseboard.

To convert square feet to square yards, divide by 9. To convert square feet to square metres, multiply by 0.09290304. For the 152 ft² L-shaped example, these give 16.89 yd² and 14.12 m² after rounding. Keep the price unit aligned with the area unit: a price per square yard cannot be multiplied directly by square feet.

Measure a room with one angled wall

If two opposite inside walls are parallel, measure both. Then measure the shortest distance between them at a right angle. Take the average of the two parallel wall lengths and multiply by that distance. Do not use the angled wall as the distance.

Choose Trapezoid for the whole room. Opposite walls of 8 ft and 12 ft, spaced 10 ft apart, give (8 + 12) ÷ 2 × 10 = 100 ft². If the other end of the room forms right angles, enter an 8 × 10 ft rectangle and a triangle with a 4 ft base and a 10 ft perpendicular height. The areas add to 80 + 20 = 100 ft².

If the opposite walls are not parallel, measure the separate shapes instead. Four side lengths alone do not determine the area of an arbitrary four-sided room.

Open the 100-square-foot trapezoid example

Open the 100-square-foot angled room worksheet

Calculate the square footage of an oval

Measure the full length end to end through the centre and the full width through the centre at a right angle. Multiply those two dimensions by π and divide by four. For an oval measuring 12 ft by 8 ft, that gives about 75.40 ft².

Choose Oval (ellipse) in the shape settings and enter both full measurements. Use a separate excluded section for a cutout. If the sides run straight between rounded ends, measure the straight and rounded sections separately.

Open the 12-by-8-foot oval example

Paste a room list without uploading a floor plan

Open Paste several rectangles at once to turn measurement notes into editable area rows. For example, Living room: 12 ft 6 in x 10 ft 3 in adds 128.125 square feet; Closet: 4 ft x 3 ft adds 12; Subtract island: 2 ft x 1 ft removes 2. The combined net area is 138.125 square feet before waste.

Each dimension may have an explicit unit, including 4 m 25 cm or 12 feet written as 12 ft. Unsuffixed dimensions use the currently selected length unit. The importer converts explicit units into the selected unit and keeps feet/inches or metres/centimetres components when possible. Fractions, thousands separators and three-dimensional entries are rejected.

Import replaces all area rows only after every line and the batch total pass validation. It keeps the selected unit, price and currency. Blank lines are ignored; errors identify the original line number. All rectangles remain editable, and you can add other shapes afterward. The sketches show separate shapes, not a connected floor plan or a certified living-area measurement.

Assumptions and limitations

Circle length means diameter; its width field is unused. Triangle width means perpendicular height, not the sloping edge. Exclusions cannot exceed included area. Feet and metres can include additional inches and centimetres; those fields are ignored for other units.

Split an irregular outline into measured simple shapes. Avoid overlapping sections and subtract only exclusions that are not already missing from your measurements. This result contains no installation waste. Use the flooring or tile tool for purchase quantities.

Sources and editorial responsibility

Maintained by Renvoro Pty Ltd. Sources inform the methods and assumptions shown here; outputs have the limitations described on this page.

Common questions

Is square footage the same as floor area?

For a flat floor, yes. Property listings may follow jurisdiction-specific measurement rules that this geometry tool does not implement.

How many square feet is a 12 by 12 room?

A rectangular room measuring 12 feet by 12 feet has 144 square feet: 12 × 12 = 144. Choose Feet (+ inches) above, enter 12 for length and width and leave both inch fields at zero. Exclusions reduce this total; this area tool does not add material waste.

How many square feet is an 8 by 10 room?

A rectangle measuring 8 feet by 10 feet has 80 square feet. The dimensions must be in feet: 8 metres by 10 metres is 80 square metres, a different area. Split an irregular room into non-overlapping shapes rather than treating its outer dimensions as one filled rectangle.

What does 400 square feet mean in room dimensions?

Area alone does not give one length and width. A square with 400 square feet measures 20 feet on each side because 20 × 20 = 400. A rectangle measuring 10 feet by 40 feet also has 400 square feet. Use the actual dimensions; the calculator does not infer a floor plan from total area.

Guide updated 2026-11-21. Calculation method and source dates remain separate.

Method reviewed 2026-10-21. Calculation standards · Report an issue