Tile Calculator

Estimate tiles, boxes and cost across multiple areas with waste and grout spacing.

Try a worked example

Loads example values in place of your current inputs. Choose one, then calculate. Examples are hypothetical; your inputs stay in this browser.

  • Hypothetical 100 ft², 12-inch square tiles and 1/8-inch joints: estimate 108 tiles; buy 11 boxes of 10 at $40/box = $440.
  • Same 100 ft² and 10% allowance with zero joint: estimate 110 tiles; buy 11 boxes of 10. This is a comparison, not a recommended joint.
  • Hypothetical 20 m², 600 mm tiles and 3 mm joints with 10% allowance: estimate 61 tiles; 16 boxes contain 64 tiles; $30/box = $480.
1. Measure tiled areas

Enter each area once and subtract spaces you will not tile. Room dimensions, tile dimensions and grout gap all use the selected length unit.

Areas 1
Selected length unit.
Selected length unit.
2. Tiles, grout and material cost
Selected length unit.
Selected length unit.
Selected length unit.
Extra material for cuts, spills or uneven surfaces.

About this tool

Calculate tiles in square feet or metres, including grout spacing, waste, whole boxes and purchased material cost. Download a worksheet with area exclusions, tile quantities and your price assumptions.

From room measurements to tile boxes

  1. Add each area once and mark uncovered spaces as exclusions. Choose a measuring unit; for a 600 mm tile in metre mode, enter 0.6, not 600.
  2. Enter the actual tile length, width and grout joint. The grout field uses the same measuring unit: 3 mm is 0.003 m. Use the joint specified for the product and installation, not a larger gap to reduce the estimated tile count.
  3. Enter a waste allowance and the number of tiles in each box. Calculate to see both estimated tiles needed and the larger whole-box purchase quantity.
  4. Check the actual layout and supplier box coverage before ordering. This repeating-area model does not arrange tiles, reuse offcuts or resolve borders and patterns.

How the calculation works

Net area uses rectangle, triangle and circle geometry. Order area = net area × (1 + waste ÷ 100). Approximate tiles = round up[order area ÷ ((tile length + gap) × (tile width + gap))]. Boxes = round up(tiles ÷ tiles per box).

Worked example

A 20 m² room with 10% waste requires 22 m². For 0.6 m square tiles and 0.003 m grout spacing, approximate count is 61 tiles. With four per box, buy 16 boxes containing 64 tiles.

How tile waste changes the box order

Illustration: 20 m² net floor, 0.6 m square tiles, 0.003 m grout, four tiles per box and a hypothetical price of 30 currency units per box. Allowances are scenario inputs, not recommendations.
WasteOrder area m²Estimated tilesWhole boxesPurchased tilesMaterial cost
5%21.00581560450.00
10%22.00611664480.00
15%23.00641664480.00

Tile area is not a cutting plan

Dividing an area by a repeating tile-and-joint module estimates a quantity, not a tile layout. A room edge can require a new tile even when the area total appears sufficient. Check whole tiles along each edge, pattern alignment and whether offcuts can be reused before relying on an order.

Box rounding is separate from waste. In this example, both 10% and 15% waste require sixteen boxes. Purchased coverage excludes grout: sixty-four 0.6 m square tiles contain 23.04 m² of tile material. Adhesive, grout quantity, substrate preparation, trim and labour are separate.

For a 10 ft by 10 ft room, choose feet/inches. A 12-inch tile can be entered as zero feet plus 12 additional inches in both tile dimensions. A 1/8-inch joint is zero feet plus 0.125 additional inches; it is not 0.125 feet. With 10% allowance, the repeating-area estimate is 108 tiles. Boxes of ten mean eleven boxes, containing 110 tiles. The two tiles added by box rounding are not guaranteed reusable spares after installation. Zero joint gives 110 estimated tiles in this comparison; use the joint required by the actual product and installation.

Assumptions and limitations

Grout spacing is a repeating-grid approximation, not an exact layout. Edge grout, cut reuse, pattern alignment and irregular corners are not modelled. Price per tile includes all tiles in rounded boxes; area pricing uses their nominal tile area.

Check the supplier’s stated box coverage. Diagonal layouts and patterned tiles often require more waste than straight grids. Dry-layout complex patterns and confirm all boxes share the required shade and calibration.

Guide updated 2026-10-22. Calculation method and source dates remain separate.

Method reviewed 2026-10-12. Calculation standards · Report an issue