Flooring Calculator

Estimate flooring area, waste, boards, packs and purchase cost.

Try a worked example

Loads example values in place of your current inputs. Choose one, then calculate. Examples are hypothetical; your inputs stay in this browser.

  • Hypothetical 200 ft² floor, 15% allowance and 22 ft² per pack: 11 packs supply 242 ft². The 42 ft² above net area separates into 30 ft² allowance and 12 ft² pack rounding; at $40 per pack, cost is $440.
  • Same hypothetical floor and packs with a 10% allowance: 220 ft² required, exactly 10 packs, $400. The percentage is a comparison input, not an installation recommendation.
  • 20 m² living room + 6 m² hall − 2 m² cupboard = 24 m². With 10% allowance and 2.2 m² per pack: 12 packs supply 26.4 m²; at $30 per pack, cost is $360.
1. Measure rooms and exclusions

Use one length unit for every room. Add each space once; mark areas you will not cover as exclusions.

Rooms and exclusions 1
Selected length unit.
Selected length unit.
2. Flooring packs and material cost

Use the coverage printed on your product pack. Room measurements and pack coverage can use different units.

Extra material for cuts, spills or uneven surfaces.
Supplier pack coverage, not nominal board area.
3. Board-count assumptions

These dimensions affect only the nominal board-count estimate. Pack quantity and material cost use supplier pack coverage above. The starting dimensions are examples; replace them with your product dimensions.

Selected length unit.
Selected length unit.

About this tool

Calculate flooring area, whole packs or boxes and material cost for multiple rooms. Subtract exclusions, add waste, and use the supplier’s coverage for laminate, vinyl or hardwood packs. Download a material worksheet with room exclusions, waste, whole-pack rounding and price assumptions.

How many flooring boxes or packs do I need?

  1. Try a worked example to see a whole-pack boundary or multiple metric rooms with an excluded cupboard. Examples replace current entries; review the hypothetical dimensions and prices before calculating.
  2. Measure each room and connecting area once. Use Trapezoid when two opposite walls are parallel, or Oval (ellipse) for a genuinely elliptical area. Split other irregular rooms into supported shapes, and exclude areas where flooring will not be installed.
  3. Enter waste for your layout and installation requirements. The calculator adds this to the net floor area before rounding the order.
  4. Read square-foot or square-metre coverage from the box label and select that coverage unit. A box and a pack mean the same purchasing unit here.
  5. Use the whole-pack count for purchasing. Nominal board count is a separate area estimate and does not plan cuts. Price per pack or area uses the coverage of the rounded packs; underlay, trim and labour are excluded.

How the calculation works

Order area = net area × (1 + waste ÷ 100). Packs = round up(order area ÷ coverage per pack). Purchased area = packs × pack coverage. Board count = round up(order area ÷ nominal board area); this count is an estimate separate from supplier pack coverage.

Worked example

A 20 m² room with 10% waste requires 22 m². At 2.2 m² per pack, order 10 packs. At $45 per pack the material estimate is $450. A 1.2 m × 0.2 m plank gives a nominal count of 92 planks.

Flooring waste versus whole-pack rounding

Illustration: 200 ft² net floor, packs covering 22 ft² each and a hypothetical price of 40 currency units per pack. Waste percentages are comparison inputs, not installation recommendations.
Waste inputRequired ft²Whole packsPurchased ft²Material cost
5%210.0010220.00400.00
10%220.0010220.00400.00
15%230.0011242.00440.00

How many metres of flooring do I need?

Room lengths use metres (m), but flooring coverage uses square metres (m²). Multiply length by width for a rectangular room: 4 m × 3 m = 12 m² before any allowance. Do not add the two lengths and treat the result as floor area. In this calculator, select metres for room dimensions and square metres for the supplier’s pack coverage.

For an illustrative 10% allowance, that 12 m² room needs 13.2 m² of coverage. With 2.2 m² printed on each pack, the order is 6 whole packs. The allowance and pack size are hypothetical inputs, not installation recommendations; use your product’s coverage and layout requirements.

A quote per linear metre needs the product width to relate length to area, as with a roll product. Do not enter a linear-metre figure as square-metre pack coverage. This tool estimates boards or planks bought in packs; it does not plan roll widths, seams, pattern matching or a cutting layout.

Choosing pack coverage and a waste allowance

Use the coverage printed on the actual pack, not the dimensions of one board. Products with similar board sizes can contain different numbers of pieces. Keep pack coverage in its selected square-foot or square-metre unit when changing the room measuring unit.

Waste covers an assumed allowance for cuts and unusable pieces; whole-pack rounding adds another purchasing surplus. These are separate. In the table, a 10% allowance needs exactly ten packs, while a 15% allowance crosses into an eleventh pack. The result breakdown separates net floor area, planned allowance and whole-pack rounding. With 15%, the 200 ft² floor needs 230 ft², and eleven packs supply 242 ft²: 30 ft² is planned allowance and 12 ft² comes from pack rounding. Neither figure predicts reusable leftovers. The cost uses purchased coverage.

The result visual separates purchased coverage into net floor area, the entered cutting allowance and extra area from rounding up to whole packs. These proportions do not describe a layout or predict usable offcuts. Exact quantities and the room-by-room breakdown remain in the tables.

Choose the allowance from the product instructions and installation plan. Diagonal layouts, pattern matching, narrow offcuts and spare boards can change the order. A nominal board count cannot determine an efficient cutting layout. Underlay, transitions, skirting, preparation, delivery and labour need separate estimates.

Assumptions and limitations

Pack coverage is supplier data and may differ from nominal board dimensions. Costs use rounded purchased packs or their area, not bare floor area. This estimator does not calculate a laying pattern, minimum end cuts or expansion gaps.

Measure each room consistently and avoid counting connecting spaces twice. Confirm whether closets need flooring before excluding them. Underlay, trim, adhesives, delivery and labour are separate. Complex layouts can need a higher waste allowance.

Guide updated 2026-11-21. Calculation method and source dates remain separate.

Method reviewed 2026-10-12. Calculation standards · Report an issue