Grade Calculator

Calculate weighted or points-based grades and find a required final-exam score.

Enter percentage scores, for example 84 for 42 marks out of 50. To enter raw marks instead, choose Points earned/possible. Use one consistent scale for category weights.

Try a worked example

Loads example values in place of your current inputs. Choose one, then calculate. Examples are hypothetical; your inputs stay in this browser.

  • 80 × 70/100 + 100 × 30/100 = 86%. Contributions are 56 and 30 percentage points, not the unweighted 90% average.
  • Total earned is 60 from 110 possible points: about 54.5455%. Averaging the individual 100% and 50% scores would incorrectly give 75%.
  • Coursework contributes 80 × 0.8 = 64 percentage points. The final must supply 11 points: 11/0.2 = 55%. Overall outcomes range from 64% to 84%.
  • With the same 80% current grade and 20% final, an 85% target needs 105% on the exam. Even a perfect 100% final gives 84% overall in this model.
  • 80% coursework weighted at 80% already contributes 64 points. The algebraic requirement is -20%, so any allowed final score from 0% upward reaches a 60% target under these inputs.
Desired whole-course percentage, not the exam score.
Final share of the whole course. Grade rows must exclude this exam.
Before weighting; final exam is not an entered row.
Grade entry 1
Percentage in weighted/final methods; raw points in points method.
Points method only.
Any consistent weighting scale.

About this tool

Combine weighted percentages or earned/possible points, drop the lowest scored entries and find the final-exam grade needed for a target. Enter the grading rules your course actually uses.

Separate completed work from the final exam

  1. Choose weighted categories for percentage scores with relative weights, or points for earned and possible points. Category weights normalize over the kept entries; they do not have to add to 100.
  2. Enter only work that belongs in the current grade. In final-exam mode, do not include the final as an entered row: its whole-course weight is supplied separately.
  3. If your course permits dropping entries by raw percentage, set the number to drop. This model removes the lowest percentage scores first, then recalculates the remaining weights or possible points. It does not choose the lowest-impact removal.
  4. Inspect each included entry’s contribution to the current grade. In final-exam mode, compare the target with the overall outcome range and the table of alternative final scores.
  5. Confirm your syllabus rules, rounding and any minimum-exam requirement. The tool does not infer letter grades, extra credit, category-specific drop rules or official eligibility.

How the calculation works

Weighted grade = sum(score × weight)/sum(weight). Points grade = sum(earned)/sum(possible) × 100. Required final = [target − current × (1 − final weight)]/final weight. Dropped entries are chosen by percentage before recalculation.

Worked example

A current coursework grade of 80% and a final worth 20% contribute 64 percentage points before the exam. To reach 75% overall, the final must supply 11 points, requiring 55%. A 100% final would give 84% overall, so a target of 85% would require 105% and is outside this model’s allowed final-score range. Load the examples above to inspect both cases.

Points totals are not an average of percentages

Two assessments can have different sizes. The chosen grading method determines how they combine.
AssessmentEarned / possibleIndividual percentage
Short quiz10 / 10100%
Long test50 / 10050%
Points-method total60 / 11054.5455% (rounded)
Unweighted mean of percentages(100 + 50) / 275%; a different grading rule

Gradebook simulator for an upcoming assignment

Start with completed work to see your current grade. For a total-points course, a quiz scored 18 out of 20 and a project scored 26 out of 30 give 44 out of 50, or 88%.

To test an upcoming 20-point assignment, open the second example and change its earned points. A predicted 16 out of 20 gives 60 out of 70, or 85.7143%. The assignment score is 80%, which pulls the running grade below 88%.

If the gradebook counts a missing assignment as a zero, enter 0 out of 20 to model that policy. The grade becomes 44 out of 70, or 62.8571%. Leave the row out of the completed-work calculation if the course excludes it until grading. Use your syllabus rules for courses with weighted categories.

Load completed work only (88%)

Try a 16 out of 20 assignment (85.7143%)

Model an assignment scored zero (62.8571%)

Current-grade contributions are not yet whole-course points

Scores of 80 and 100 with relative weights 70 and 30 contribute 56 and 30 points to an 86% current grade. If those rows represent coursework before a final, multiply that current grade by the coursework share before adding the final score’s contribution.

For an 80% current grade and a 20% final, coursework contributes 64 whole-course percentage points. A 50% final adds 10 points, giving 74% overall. A 100% final adds 20 points, giving 84%. The scenario rows are alternatives and must not be added together. Values display up to four decimal places; scenario comparisons treat differences smaller than one billionth of a percentage point as equality. Projection bounds also normalize floating-point overshoot of a perfect 100% average within that tolerance.

Dropping the lowest percentage can change the weighting

This calculator sorts the entered rows by their percentage score, removes the requested lowest rows, then normalizes the kept rows. A small quiz with a low percentage may be removed before a large test whose percentage is higher, even if another removal would improve the total more.

Course rules may drop work inside individual categories, replace scores or require a minimum final-exam mark. Those policies are not inferred here. A computed target being reachable does not guarantee a course result, permission to skip an exam or any academic outcome.

Assumptions and limitations

Weighted mode treats entered scores as percentages; points mode divides earned by possible. Scores above 100% and extra credit are outside this model. Weights normalize automatically. Dropping by percentage may differ from a course’s category or lowest-impact rule.

Keep at least one included grade. A required final above 100% is labelled unattainable under this model; below zero means the target is already met with a zero final. Confirm weighting, rounding and letter-grade boundaries with your institution.

Sources and editorial responsibility

Maintained by Renvoro Pty Ltd. Sources inform the methods and assumptions shown here; outputs have the limitations described on this page.

Guide updated 2026-11-19. Calculation method and source dates remain separate.

Method reviewed 2026-10-23. Calculation standards · Report an issue